UDK 4-DIO/L-R

https://www.phoenixcontact.com/us/products/2775317 Feed-through terminal block - UDK 4-DIO/L-R - 2775317 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Single-level terminal block with two-sided double connection and built-in diode, cross section: 0.2 - 2.5 mm², AWG: 30 - 10, width: 6.2 mm, color: gray The figure shows the UDK 4 terminal block Product Features ■ ■ Two connection points on each side to accommodate several conductors Double bridge shaft enables individual potential distribution and supply Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 15.56 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 4 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V2 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current 1 A (the maximum current is determined by the diode) Nominal current IN 1A 03/08/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/2775317 Feed-through terminal block - UDK 4-DIO/L-R - 2775317 Technical data General Nominal voltage UN 630 V Open side panel Yes Dimensions Width 6.2 mm End cover width 1.5 mm Length 63.5 mm Height NS 35/7,5 47 mm Height NS 35/15 54.5 mm Height NS 32 52 mm Connection data Note Terminal point Connection method Screw connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² Cross section with insertion bridge, solid max. 2.5 mm² Cross section with insertion bridge, stranded max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1 mm² sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 03/08/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/2775317 Feed-through terminal block - UDK 4-DIO/L-R - 2775317 Technical data Connection data 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Cross section with insertion bridge, solid max. 2.5 mm² Cross section with insertion bridge, stranded max. 2.5 mm² Stripping length 8 mm Internal cylindrical gage A3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V2 Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 03/08/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/2775317 Feed-through terminal block - UDK 4-DIO/L-R - 2775317 Approvals Approvals Approvals EAC Ex Approvals Approvals submitted Approval details EAC  Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/08/2016   Page 4 / 4